#Twain sane scanner software how to#
#Twain sane scanner software update#
#Twain sane scanner software software#
#Twain sane scanner software password#
#Twain sane scanner software download#

If you exit back to the bash prompt you can type either “hostname” or “ifconfig” to view your settings (eth0 is wired, wlan is wireless). When prompted, select “Yes”.Īt this point you’d might want to grab a pen and paper and take note of either the hostname or IP - as we’ll be doing the rest of this setup remotely. Go to Interface Options (3) and select SSH (P2).

Enabling SSH To free us from the pain of having to connect to a screen, the last thing we want to do is enable SSH.

This will make your Pi wait for a network connection when it boots up. Next, head to Network at Boot (S6) and select “Yes” when prompted. First, go to Boot/ Auto Login (S5) and choose Console Autologin (B2).

Auto-Login and Network at Boot Both these settings are also located under System Options (1).

Changing your hostname is a good idea if you have multiple Pi’s on your network.

#Twain sane scanner software password#

Both these settings can be found under System Options (1) and either Password (S3) or Hostname (S4).

Changing your password and hostname At this point, it might be a good idea to change the default password and possibly also the hostname.

If it fails, check your network connection/settings again (or maybe just give it another minute to connect).

#Twain sane scanner software update#

Head down to Update (8) and behold the magic.

#Twain sane scanner software software#

Updating your software A great way to check your connection is to update your Raspberry Pi.Fill in your SSID and password, and give it a few seconds to connect. Follow the on-screen wizard and remember you can start typing your region name to avoid having to scroll that whole list when selecting country. For everybody else, open System Options (1) and Wireless LAN (S1). Wireless Connection If you choose to use a wired connection you can skip this step.You can always test this by exiting from the configuration tool and typing into the terminal or an editor. You can just stick with the default generic layout, the most important thing is to select the correct language layout here.

Keyboard Layout: Head down to Localization Options (5) and select Keyboard (元).

I’d recommend setting the correct keyboard layout first, which will make connecting to our wireless so much easier (especially if you have a lot of special characters in your password like I do). Now, there are a few things we need to configure to make this work. Once you’re in, start the configuration tool by running the following command: sudo raspi-config

#Twain sane scanner software how to#

We’ll get into how to change that soon enough. When prompted, “pi” is the default username, and “raspberry” the password. Hook you Pi up to a screen and keyboard, and follow along (there are other ways to do this, but it’s beyond the scope of this article). Up next, just select your SD card and hit that “Write” button.Ĭonfiguring your Raspberry Pi In order to make everything run smoothly, we need to do some configuration. We won’t be needing any GUI for this, so we’ll stick with the Raspberry Pi OS Lite which can be found under the “Choose OS” button.

#Twain sane scanner software download#

Head over to their website and download the Raspberry Pi Imager which makes everything easy as pie(feel free to use any other tool and download the image manually if you prefer to). Preparing your Raspberry Pi To keep things simple, we’ll just stick with the official Raspberry Pi OS Lite (formerly known as Raspbian). So grab your Raspberry by the Pi, strap in, and let’s make printing great again. So this is the story, all ‘bout how, my prints got twisted upside down. And speaking of SANE (Scanner Access Now Easy), let’s just say their glorious website got my attention.

Although I’ve most definitely used CUPS (Common Unix Printing System) before, I’ve never set it up myself. I started Googling, and quickly stumbled upon CUPS and SANE.

Heck, I’d might even be able to scan documents without installing any software on my machine! This made me think, hooking it up to a Raspberry Pi and share it over the network would allow me to put it back in the closet where it truly belongs. With a cable so short I literally had to place my laptop on top of it to print. And I for one am sick and tired of it.Īlthough most of us had our fair share of fun fighting ginormous office printers with more drawers than your average dresser (and also, lasers), being stuck working from home has forced many of us to catch up with an old f(r)iend at the back of a closet. Although we don’t know exactly why (and by whom), good people are each day slowly loosing their minds battling these ink-spitting, paper-jamming, pieces of sheets. Arguably the single most frustrating piece of hardware ever mass-produced, and most likely part of a sick and twisted social experiment by an extraterrestrial species having a laugh at our expense. My old MP280 and it’s new best friend, a Raspberry Pi 3 Model B.